Home > Products > Enclosed Warm Water Pipe with built-in Electric Heating Wire
 
The warm water and vapor heating method in the mortar without circulation of warm water maximized the heat efficiency.
The economical floor heating system using common electric power to supply the minimum required heat with no heat loss saves the heating cost by 75% in case of common oil, 50% in case of city gas, and 14% in case of midnight electric power.
As the system is installed to consume 19W/M of power, power consumption does not exceed 19W/M even the failure of temperature controller.
 
Although there are so many 360вк revolutions of XL pipe in the mortar, the heat transmission wire may easily be replaced and the water may easily be added opening the inspection caps at the both ends of XL pipe and this technology was patented.
As this system may be applied to existing pipeline, there is no inconveniency to users.
 
The environment may be maintained fresh and clean because no smoke or noise is generated.
This system is suitable for clean heating of kindergartens, dormitories, training centers, Ob/Gyn hospitals, and elementary school classrooms etc.
 
As differentiated heating by part and independent heating of rooms is possible, power loss may be prevented.
This system is especially suitable to the midnight boilers that cannot heat the floors due to insufficient capacity.
 
This system shows high economical efficiency in large buildings such as school dormitories, high grade hotels, motels, military/police quarters, government offices, training centers, condominiums, and silver towns as well as small-area buildings.
 
 

floor heating system